Concrete Paving Stone Machines

How does a concrete paving stone machine work?

A concrete paving stone machine compacts concrete mix inside a mold using hydraulic pressure, forming the products on production pallets. Molding, compaction and product transfer follow the selected production program. Controlled compaction helps maintain consistent dimensions and surface profiles across concrete blocks and paving stones throughout production.

The products are transported to the curing area on the same pallets and remain there until they develop the required strength. Production pallet requirements should therefore be calculated based on the product type, daily output target and curing time. The plant layout should include empty pallet storage, a curing area for freshly molded products and finished product storage to support an efficient production flow.

Automatic mode carries out repetitive operations according to the selected program. Manual control allows operator intervention during setup, maintenance, trial production and production line checks. Stop, pause and resume functions also help manage production during material replenishment or shift changes.

NBM model comparison

When comparing models, consider output per cycle, product type and automation options together. The dimensions in the table refer to standard concrete blocks; the block and interlocking paver quantities represent alternative production outputs.

Choosing a semi-automatic or fully automatic plant configuration is separate from selecting the machine's automatic or manual control mode. The automation level affects staffing and product handling, while the control mode determines how the operator runs the machine during production or setup.

Model Output per cycle Product dimensions Hydraulic pressure Operating configuration
NBM 7042 Concrete Block & Paving Stone Machine 18 standard concrete blocks or 42 interlocking pavers Standard concrete block: 20 × 40 × 20 cm 120-140 bar Fully automatic; automatic and manual control
NBM 6036 Concrete Block and Paving Stone Machine 15 standard concrete blocks or 36 interlocking pavers Standard concrete block: 20 × 40 × 20 cm 120-140 bar Fully automatic; automatic and manual control
NBM 5030 Concrete Block and Paving Stone Machine 12 standard concrete blocks or 30 interlocking pavers Standard concrete block: 20 × 40 × 20 cm 120-200 bar Semi-automatic or fully automatic; automatic and manual control
NBM 5025 Concrete Block and Paving Stone Machine 10 standard concrete blocks or 25 interlocking pavers Standard concrete block: 20 × 40 × 20 cm 120-140 bar Fully automatic; automatic and manual control
NBM 4020 Concrete Block and Paving Stone Machine 8 standard concrete blocks or 20 interlocking pavers Standard concrete block: 20 × 40 × 20 cm 120-200 bar Semi-automatic or fully automatic; automatic and manual control

Which model suits your production targets?

For businesses planning high-volume production, the NBM 7042 Concrete Block & Paving Stone Machine offers an output of 42 interlocking pavers or 18 standard concrete blocks per cycle. A fully automatic plant can be operated by two operators and one forklift driver. When selecting this model, plan pallet availability, curing space and storage capacity to support its output.

For high-volume plants with a steady flow of orders, the NBM 6036 Concrete Block and Paving Stone Machine produces 36 interlocking pavers or 15 standard concrete blocks per cycle. Its fully automatic configuration and program-controlled operation help manage different production programs in line with order requirements.

For medium- to high-volume orders, the NBM 5030 Concrete Block and Paving Stone Machine offers semi-automatic and fully automatic system options. The semi-automatic plant requires 9 staff members, while the fully automatic plant requires 3. The required electrical supply capacity is 150 kVA and 185 kVA respectively, so consider your power infrastructure when choosing the automation level.

Businesses seeking a fully automatic line that produces 25 interlocking pavers or 10 standard concrete blocks per cycle can consider the NBM 5025 Concrete Block and Paving Stone Machine. Selectable programs support the controlled use of different production recipes and product designs.

For businesses looking to expand production in a controlled manner using their workforce, the NBM 4020 Concrete Block and Paving Stone Machine can be configured as a semi-automatic system. Plants aiming to reduce staffing requirements can consider the fully automatic option. The semi-automatic configuration requires an electrical supply capacity of 85 kVA, while the fully automatic configuration requires 110 kVA.

Paving stone and concrete block options and mold selection

NBM models can produce interlocking pavers and standard concrete blocks measuring 20 × 40 × 20 cm. When planning your product range, first decide which product group will be your main focus. Since the same model produces different quantities of paving stones and standard concrete blocks per cycle, compare capacity based on your target product.

Compaction inside the mold helps maintain the product's dimensions and shape. Machine settings and production programs suited to the product design are integral to this process. Manual control can be used during mold setup and trial production. Providing your intended product types and dimensions when discussing a quotation helps you assess machine settings alongside your production plan. When selecting your product range, also account for production pallet requirements and curing area utilization.

Installation, training and technical support

NOVAL provides plant planning, installation, operator training, technical service and spare parts support. NOVAL supplies a detailed dimensioned layout for the machinery and equipment. The buyer is responsible for preparing the plant's reinforced concrete infrastructure. Qualified civil engineers must assess concrete quality and ground bearing capacity and perform the structural calculations.

The recommended minimum total site area for plants using these models is 4,000 m². A covered area of at least 600 m² is recommended to protect the machine area, empty pallet storage and curing area for freshly molded products from adverse weather. Plan the allocation of space around the selected automation system.

Before installation, the electrical supply to the control panel, the water line to the mixer unit and the compressed air system must be ready. Cement, aggregate, water, concrete meeting the project specifications, an air compressor with a receiver capacity of at least 500 liters, a forklift, a loader, a telescopic crane with a minimum lifting capacity of 10 tonnes, an electrical distribution panel and the designated operators must be available on site.

An authorization certificate is issued upon completion of training. The warranty covers a total of 4 years on a 2+2 basis. Complimentary spare parts are supplied with the machine, alongside prompt service, spare parts support and online technical assistance.

When requesting a quotation for a concrete paving stone machine, share your production targets, staffing plan, existing power infrastructure and site layout with the NOVAL sales team to identify a production line suited to your plant.

Frequently Asked Questions

Can the same machine produce interlocking pavers and concrete blocks?

Yes. All five NBM models can produce interlocking pavers and standard concrete blocks. Output per cycle varies by model and product type.

Are production pallets also used during curing?

Yes. Products are formed on production pallets and remain on the same pallets throughout curing. Pallet quantities should be planned according to production targets, product type and curing time.

Can production resume from where it stopped?

Yes. The machines feature stop, pause and resume functions. These can be used during material replenishment, shift changes and production line checks.

Is a certificate issued after operator training?

Yes. An authorization certificate is issued upon completion of operator or user training provided by NOVAL.

Is remote technical support available?

Yes. Technical assessment, fault diagnosis and technical support can be provided over an internet connection. Prompt service and spare parts support are also available.

Request a quote for Concrete Paving Stone Machines: share the product you plan to make, your target capacity and your site details.

E-Catalog